Amplicomms BigTel 40 Plus Manual Del Usuario página 54

Saving one-touch dialling numbers
1. Lift the receiver.
2. Press
3. Enter the phone number (max. 24 digits) and press
4. Press the required one-touch dialling button (M1 - M6).
5. Replace the receiver. The entry is saved.
Dialling with the one-touch dialling buttons
1. Lift the receiver.
2. Press the required one-touch dialling button
(M1 - M6).
Quick dialling
It is possible to store 10 phone numbers so that
they are dialled simply by pressing two buttons
(quick dialling).
NOTE:
You cannot delete the phone numbers stored
on the quick dial buttons.
Existing numbers are overwritten when new
phone numbers are stored.
Programming quick dial buttons
1. Lift the receiver.
2. Press
3. Enter the phone number (max. 24 digits) and press
4. Enter the required memory location number (0 - 9).
5. Replace the receiver. The entry is saved.
Dialling using quick dial buttons
1. Lift the receiver.
2. Press
3. Enter the required memory location number
(0 - 9).
4. The phone number stored is automatically dialled.
.
.
.
54
.
.