PRODUCT SPECIFICATIONS
ENGINE
Engine Type .........................................GX390, 389cc, OHV
Fuel Volume ................................................................ 8 gal.
GENERATOR
Rated Voltage .....................................................120V/240V
Rated Amps ..................................................... 62.5A/31.3A
KNOW YOUR GENERATOR
See Figure 2.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AC CIRCUIT BREAKERS
The circuit breakers are provided to protect the generator
against electrical overload.
AIR FILTER
The air filter helps to limit the amount of dirt and dust drawn
into the unit during operation.
ANALOG HOUR METER
The analog hour meter operates whenever the engine is
running and keeps track of how many hours the unit has
been used.
BATTERY CHARGING FUSES
The engine battery charge circuit fuse and the battery main-
tainer fuse protect the battery.
CHOKE
The choke is used when starting a cold engine.
ENGINE SWITCH
The engine switch is used either alone or in combination
with the recoil starter grip to start the generator.
FEATURES
Rated Output ...........................................................7500 W
Starting Watts ..........................................................9375 W
Rated Frequency ........................................................60 Hz
DIMENSIONS
Length ........................................................................ 32 in.
Width .......................................................................... 20 in.
Height ......................................................................... 24 in.
Weight ................................................................. 209.4 lbs.
FUEL TANK
The fuel tank has a capacity of 8 gallons.
FUEL VALVE
Fuel flow from the fuel tank to the engine is turned on and
off using the fuel valve.
GROUND TERMINAL
The ground terminal is used to assist in properly grounding
the generator to help protect against electrical shock. Consult
with a qualified local electrician for grounding requirements
in your area.
LOW OIL SHUT DOWN PROTECTOR
The low oil sensor causes the engine to stop if the level of
lubricant in the crankcase is insufficient.
OIL CAP/DIPSTICK
Remove the oil fill cap to check and add lubricant to the
generator when necessary.
OIL DRAIN PLUG
When changing the engine lubricant, unscrew and remove
the oil drain plug to allow old engine lubricant to be drained.
RECEPTACLES
Your generator has the following single phase, 60 Hz outlets:
four 120 Volt AC, 20 Amp GFCI receptacles, and one 240 Volt
AC, 30 Amp receptacle. These can be used for operating ap-
propriate appliances, electrical lighting, tools, and motor loads.
RECOIL STARTER GRIP
The recoil starter grip is used (along with the engine switch)
to start the generator's engine.
Page 10 — English