Publicidad
Idiomas disponibles
Idiomas disponibles
Voltage
40 V (max.)
40 V (max.)
40 V (max.)
40 V (max.)
40 V (max.)
NOTICE:
The battery charger is for charging Makita-battery cartridge. Never use it for other purposes or
for other manufacturer's batteries.
NOTE: If the charging light flashes slowly in blue color, charging may not start due to the condition of the battery
cartridge as below:
—
Battery cartridge from just-operated tool or battery cartridge that has been left in a location exposed to direct
sunlight for a long time.
—
Battery cartridge that has been left for a long time in a location exposed to cold air.
NOTE: When the battery cartridge is too hot, charging does not begin until the battery cartridge temperature
reaches the degree at which charging is possible.
NOTE: If the charging light changes to red color, charging is not possible. The terminals on the charger or battery
cartridge are clogged with dust or the battery cartridge is worn out or damaged.
Changing melody upon completion of charging
1.
Inserting the battery cartridge into charger brings out last preset brief melody sound of completed charging.
2.
Removing and re-inserting it within five seconds after this action makes the melody sound change.
3.
Every time removing and re-inserting it within another five seconds after this, the melody sound changes in
order.
4.
When the desired melody sound comes out, leave the battery cartridge being inserted and the charge will
begin. When a "short beep" mode is selected, no completed charging signals comes out. (Silent Mode)
5.
With finish of charge, the charging light will light up in green and the melody sound preset at the insertion of
battery cartridge or buzzer sound (a long beep) comes out to notify completion of charge. (In selected silent
mode, no sounds come out.)
6.
Preset melody sound remains stored even when the charger is unplugged.
Cooling system
This charger is equipped with cooling fan for heated
battery in order to enable the battery to prove its own
performance. Sound of cooling air comes out during
cooling, which means no trouble on the charger.
Blue and red light will flash alternately for warning in the
following cases.
•
Trouble on cooling fan
•
Incomplete cool down of battery, such as, being
clogged with dust
The battery can be charged in spite of the alternate blue
and red light. But the charging time will be longer than
usual in this case. Check the sound of cooling fan, vent
on the charger and battery, which can be sometime
clogged with dust.
Always keep clean the vent on charger and battery for
cooling.
► Fig.3: 1. Exhaust vent 2. Intake vent
Number of cells
Li-ion battery cartridge
10
10
10
20
20
Capacity (Ah)
BL4020
BL4025
BL4040
BL4050F
BL4080F
NOTE: The cooling system is in order although no
sound of cooling fan comes out, if the blue and red
light will not flash.
NOTE: The products should be sent to repair or
maintenance, if the blue and red light flashes alter-
nately so often.
6 ENGLISH
Charging time
(Minutes)
2
2.5
4
5
8
170
30
38
67
85
Publicidad
