Publicidad
Idiomas disponibles
Idiomas disponibles
1. Dust collector
2. Dust container release button
3. Pivot lock button
4. On/off switch
5. Container door
6. Container door release latch
7. Charger
8. Flip-out brush
9. Dust collector extension
Assembly
Adjusting the dust collector
(fig. A - C)
The dust collector (1) has a brush that can
be folded forward for dusting and upholstery
cleaning.
• The dust collector (1) is stored under the
appliance. To adjust for use, unplug the
appliance from the charger (7).
• Press the pivot lock button (3) and rotate
the dust collector (1) to the required position.
• Release the pivot lock button (3) to lock the
dust collector in position
• The dust collector can be extended by
pulling the dust collector extension (9) until it
locks into position.
• The extension can be retracted by pressing
the button (10) and pushing the extension
back into the dust collector.
• The dust collector should be returned to
the storage position under the appliance
after use and while charging the appliance.
Use
• Before first use, the battery must be
charged for at least 9 hours.
• Plug the appliance into the charger
whenever power gets low.
Charging the battery (fig. D)
• Make sure that the appliance is switched
off. The battery will not be charged with the
on/off switch (4) in the on position.
• Plug the appliance into the charger (7) as
shown. The charging indicator wil be lit.
Product Features
4
A
B
C
Publicidad
