Descargar Imprimir esta página

RotoZip RZ5 Instrucciones De Funcionamiento Y Seguridad página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

RZ 2610954840 07-07
Functional Description and Specifications
Zipmate attachment must be used only with an hard auxiliary control
!
side handle. Two handed control of solid gripping handles will provide
WARNING
sufficient control of the cutting wheel in case of recoil.
Disconnect the plug from the power source before making any
!
assembly, adjustments or changing accessories. Such preventive safety
WARNING
measures reduce the risk of starting the tool accidentally.
LOCK LEVER
ADJUSTMENT
SCREW
Recommended for use with: Rebel, Revolution,
Hard auxiliary control handle must be obtained for models RZ1 and RZ25.
!
Call 1-877-ROTOZIP.
WARNING
Note : The speed of your tool will be reduced 2 : 1 when using your Abrasive Cut-Off attachment.
Always
!
handle
control over torque reaction or kick-back.
WARNING
Operation of the tool without the auxiliary
handle could cause loss of control of the tool,
resulting in possible serious personal injury.
REMOVING AND INSTALLING
ABRASIVE CUT OFF ATTACHMENT
(Keyless models)
Disconnect the plug from
!
the power source before
making any assembly, adjustments or
WARNING
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally. Make certain that the keyless
8/16/07
3:55 PM
Zipmate
Abrasive Cut Off Attachment
®
WHEEL GUARD
LOCK LEVER
LOCK
LEVER
and all RZ model Rotary Tools.
Assembly
use
auxiliary
for
maximum
Page 14
WHEEL GUARD
FIG. 1
chuck is securely tightened before turning the
tool on.
1. Depress and hold the shaft-lock in and
rotate the keyless chuck and shaft until the
shaft-lock engages and holds the shaft
(Fig. 2).
2. Rotate the keyless chuck (counter-
clockwise) until chuck it is completely open.
3. Insert drive bit into the keyless chuck up to
the flange, and securely tighten chuck.
4. Open
locking
attachment onto the collar. Note: It may be
necessary to rotate attachment slightly and
hold both the tool and attachment shaft
-14-
GUARD
LOCK LEVER
ADJUSTMENT
SCREW
ABRASIVE
WHEEL
SHAFT LOCK
lever
and
position

Publicidad

loading

Este manual también es adecuado para:

Rz10Rz20Rzft