Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Getting Started
• Take the air cleaner out of the box and remove the clear protective plastic bag.
• Place the air cleaner on a firm level surface.
• BEFORE TURNING ON THE AIR CLEANER, if you choose to use the optional
VOC filter, you will need to install it and confirm that all the filters are firmly in place.
Fig. 1
Fig. 2
Fig. 3
1. Open the rear grill by gently pushing
the release tabs toward the outside of
the unit. See Fig. 1
2. Pull the grill away from the body until
the tabs at the bottom of the grill
plate easily slide away from the unit.
See Fig. 2 & 3
6
Fig. 4
TABS
TABS
Fig. 5
Fig. 6
3. The pre-filter and Nano-Coil filter will be
installed already. Confirm that Nano-Coil
filter is fully engaged on center hub.
To install the VOC/Odor filter (optional),
remove the VOC/Odor filter from the
plastic bag. Place the VOC filter into the
unit flush against the pre-filter, secured
by four clips.
See Fig. 4
4. Place the tabs at the bottom of the grill
plate into the base of the unit. See Fig. 5
5. Hold engaged bottom of the grill plate in
place and push the top of the grill plate
back toward the unit. The release tabs
at the top of the grill will click back into
place. See Fig. 6
7
Publicidad
