Publicidad
Idiomas disponibles
Idiomas disponibles
GAS TAPS
In the event of operating faults in the gas
taps, call the Service Department.
BURNERS
They can be removed and washed with
soapy water only.
They will remain always perfect if
cleaned with products used for silver-
ware.
After cleaning or wash, check that burn-
er-caps and burner-heads are dry before
placing them in the respective hous-
ings.
Note: To avoid damage to the electric
ignition do not use it when the burn-
ers are not in place.
C
F
Fig. 6.1
S
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see fig.
6.1-6.2) - failure to do so can cause seri-
ous problems.
Check that the electrode "S" (fig. 6.1) is
always clean to ensure trouble-free
sparking.
Fig. 6.2
129
Publicidad
