GreenWorks G24LT30 Manual Del Operario página 6

1 General power tool safety
warnings............................................. 4
2 Technical data.................................... 4
3 Description......................................... 4
3.1 Purpose.............................................................. 4
3.2 Overview........................................................... 4
4 Installation......................................... 4
4.1 Unpack the machine.......................................... 4
4.2 Attach the guard.................................................5
4.3 Attach the wheel................................................ 5
4.4 Attach the auxiliary handle................................5
5 Operation........................................... 5
5.1 Install the battery pack.......................................5
5.2 Remove the battery pack................................... 5
5.3 Start the machine............................................... 5
5.4 Stop the machine............................................... 5
5.5 Adjust the length of the cutting line.................. 5
English
5.6 Line cut-off blade.............................................. 5
5.7 Adjust the length of the shaft.............................6
5.8 Change to the edging mode............................... 6
5.9 Operation tips.................................................... 6
5.10 Cutting tips........................................................ 6
6 Maintenance.......................................6
6.1 General information...........................................6
6.2 Clean the machine............................................. 6
6.3 Replace the spool...............................................7
6.4 Replace the cutting line..................................... 7
7 Transportation and storage.............. 7
7.1 Move the machine............................................. 7
7.2 Store the machine.............................................. 7
8 Troubleshooting................................. 7
9 Warranty............................................ 8
10 EC Declaration of conformity.......... 8
3
EN