Kicker KM6000 Manual Del Propietário página 2

Idiomas disponibles

Authorized KICKER Dealer:

Purchase Date:

Speaker Model Number:

Your KM coaxials were specially designed for "Livin' Loud" out in the harsh marine environment. They are

made of advanced materials and construction techniques to maintain optimal performance for years to

come.

APPLICATION

The Kicker KM coaxial speakers are speciﬁ cally designed for mounting in free-air applications. The

speakers do not require a sealed enclosure for optimum performance. It is important to isolate the sound

coming off the front of the driver from the sound radiating from the back of the driver. This isolation is

usually accomplished by using the driver in a factory speaker location, or in a location with a semi-isolated

rear chamber.

LOCATION

The sound produced by the KM coaxials is directional. Find the best location for stereophonic sound. If

necessary, add more KM coaxial speakers to the system to help distribute and balance the sound-stage.

After determining the best mounting locations, carefully check the areas where the mounting hardware will

be placed.

MOUNTING

Make sure the stainless steel mounting screws and U-type speed clips will not puncture the fuel cell,

wiring, or interfere with any mechanical parts on the underside of the mounting surface. Pre-drill the

mounting screw holes using a 7/64" (2.5mm) bit, and attach the KM coaxial speakers to the boat, by

fastening the supplied stainless steel coursethreaded screws to the boat's structure. If applicable, utilize

the enclosed stainless steel U-type speed clips. Mount the speaker and grille right side-up to take

advantage of the coaxial system's integrated moisture draining system. If the supplied hardware is not

applicable to your installation, some other means of securely

attaching the speakers to the vessel must be used.

2009 KM6000W Coax Multilingual d01.indd 2

KMMarineCoaxialSpeakerOwner'sManual

Model: KM6000W

KMCOAXIALSPEAKER

11/24/2008 10:47:48 AM