Bosch GKS Professional 85 Manual Original página 17

Technical data
Hand-held circular saw
Article number
Rated power input
No-load speed
Max. speed under load
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
Constant electronic control
Starting current limitation
Base plate dimensions
Max. saw blade diameter
Min. saw blade diameter
Max. base blade thickness
Max. tooth thickness/offset
Min. tooth thickness/offset
Locating bore
Weight according to EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-5.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 94 dB(A); sound power level
106 dB(A). Uncertainty K=3 dB.
Wear hearing protection
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-5: a
2
K=1.5 m/s .
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
Bosch Power Tools
W
−1
min
−1
min
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
2
=3.0 m/s ,
Only use saw blades the maximum permitted speed of
u
h
which is higher than the no-load speed of the power
tool.
Inserting/changing the circular saw blade
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Wear protective gloves when fitting the saw blade.
u
Danger of injury when touching the saw blade.
Do not use abrasive wheels as the application tool un-
u
der any circumstances.
Selecting the saw blade
You will find an overview of recommended saw blades at the
end of these operating instructions.
English | 17
GKS 85 GKS 85 G
3 601 E7A 0.. 3 601 E7A 9..
2200
5000
3500
85
65
●
–
●
383 x 170 383 x 170
235
235
2.2
3.2
2.0
30
7.5
/ II
1 609 92A 4PY | (22.11.2018)
2200
5000
3500
85
65
●
●
●
235
235
2.2
3.2
2.0
30
7.8
/ II