GreenWorks PWA108 Manual Del Operador página 9

WARNING
If you do not use the machine：
• Stop the machine.
• Turn the water supply off.
• Disconnect the power cord from the outlet.
• Pull the spray gun trigger to release the remaining
pressure from the machine.
• Engage the trigger safety lock-out on the spray gun.
13 MAINTENANCE
WARNING
Before maintenance, make sure that you
• Stop the machine.
• Wait until all the moving parts stop.
• Disconnect the plug from the power source.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
WARNING
Replace the power cord by an approved service center.
13.1 NOZZLE MAINTENANCE
If there is too much pump pressure, the nozzle can become
clogged, you can feel a pulsing sensation while you pull the
gun trigger.
14 REMOVE THE NOZZLE
1. Pull back the quick-connect collar on the gun wand (5).
2. Remove the nozzle (3) from the gun wand (5).
15 CLEAN THE NOZZLE
1. Use a straight paper clip or cleaning tool (12) to clean the
spray tip (3).
English
2. Flush and clean the unwanted materials out of the nozzle
3. Install the clean nozzle (3) to the spray wand (5).
16
Disconnect the power cord and watter supply hose before
transportation and storage.
16.1
•
•
16.2
Make sure that the spray gun, the high pressure hose and the
pump are dry.
Make sure the machine is out of the reach of children.
Use a recommended pump protector to prevent cold
weather damage during storage in winter.
•
•
•
•
①
②
③
•
9
(3) with the garden hose (11).
TRANSPORTATION AND
STORAGE
WARNING
MOVE THE MACHINE
Point the spray wand in a safe direction.
Only hold the machine with the handgrip.
STORE THE MACHINE
WARNING
WARNING
NOTE
Disconnect the garden hose from machine.
Wind the power cord and the high pressure hose.
Clean housing and the plastic components with a moist
and soft cloth.
Make sure that the machine does not have loose or
damaged parts. If it is necessary, follow these steps/
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• If needed, call the customer service phone number
(enter number here) for servicing instructions.
Store the machine in a dry, isolated and frost-free area.
EN