Introduction; Warranty - IPC Soteco PLANET MEDIUM INOX Manual De Uso Y Manutención

PLANET

1 - INTRODUCTION

The aim of this manual is to describe the
procedures and the prescriptions that have to
be followed in order to guarantee:
- Operators' safety
- Proper use of the machine
- Best performances
IT IS NECESSARY FOR THE OPERATOR TO READ
AND LEARN THIS MANUAL BEFORE THE FIRST
START UP OF THE MACHINE.
DUE TO THE IMPORTANCE OF THESE
INFORMATIONS WE RECOMMEND TO:
- Always keep this manual at hand for an
easy consultation.
- Keep the manual in a safe place in order not
to damage or lose it.
- Ask the manufacturer/supplier for a copy in
case of damage.
- Always enclose this manual and the
manufacturer's data in case of selling.
IMPORTANT
If the vacuum cleaner purchased is ATEX
approved, there will be a serial number on
the seam-welded plate on the motor, which
will be necessary when requesting a copy
of the certifi cate, if the original is lost or
deteriorated.
The manufacturer has the right to update and
change the production and the manuals without
replacement obligation for former editions.

2 - WARRANTY

The vacuum cleaners have been inspected 100%
to guarantee a correct electric, pneumatic
and mechanic functioning.
The vacuum cleaners are covered by a 24
months warranty.
The manufacturer recognizes under warranty
all defective parts of the machine, but the
warranty coverage does not include those
parts damaged by normal wear and tear .The
warranty coverage does not include those parts
damaged during shipping or handling of the
vacuum cleaner.
Repairs must be carried out only at our service
points or directly at our headquarter.
To request your warranty service you MUST
send a written request to the dealer or to the
manufacturer bearing the machine's identifying
data (the machine is fi tted with a plate
indicating the manufacturing data) and a copy
of the invoice.
THE WARRANTY WILL DECAY IN CASE OF:
- Improper use of the machine and total or
partial failure to comply with
the instruction
- Tampering of any part of the vacuum cleaner
- Incorrect electrical installation (voltage,
socket size and wiring,....)
- Inadequate maintenance.
- The routine maintenance has been left out.
- Use of spare parts other than original's or
use of spare parts not
specifi cally indicated for the model in use.
- Partial or total failure to comply with this
manual instructions.
25