Volpi KV310 Manual Del Usuario página 33

•
When operating the tool, keep the other hand and any other part of your body at a minimum
distance of 15cm from the blade;
•
Keep all other people at a minimum distance of 1.5m
•
Blade will be hurt or jammed if cutting bigger branch
•
Do not move the tool during the pruning shear cutting, it can cause danger.
•
Do not use the device in rain or humidity environment.
•
Switch off the device after use and remove the battery from the pruner.
•
If no operation for 10 minutes, the pruner switches off automatically.
Caution: please check battery charge level or blade sharpening when cutting is difficult or not
smooth.
14.1. Cutting control mode
The KV310 electric pruning shears has two cutting control modes:
Non-progressive cutting control
Progressive cutting control
NON-PROGRESSIVE CUTTING CONTROL
When the pruning shear is turned on, the non-progressive cutting control is predetermined, that is,
when the trigger is actuated the blade performs the cutting action, and when the trigger is released the
blade opens.
PROGRESSIVE CUTTING CONTROL
To change the control mode, you must hold the trigger for 2 seconds until you hear an audible warning
(a beep), which indicates that you have changed from normal cut control mode to progressive cut
control mode.
In the progressive cutting control the blade moves according to the depth of the trigger drive, that is, if
the trigger is activated halfway, the blade moves progressively halfway through its opening.
forcedly.
33