Volpi KV310 Manual Del Usuario página 36

C. Loosen the screw of the adjustment clip with
an Allen wrench M4 (3). Remove the screw (3)
and the adjustment clip (4). Loosen the nut with
a wrench and remove (5). Remove the central
screw (6).
E. Clean the old grease (9) and apply grease on
the counter blade (10).
G. Insert the central screw (12). Tighten the nut
with a wrench (13). Place the clip with the nut
and assemble the screw (14). Tighten the screw
with an M4 Allen wrench (15).
36
C
D. Remove the blade (7) and apply grease (8) on
the teeth.
E
F. Insert the blade (11) again.
G
H. Fit the cover (16).
D
F
H