Safety Precautions And Working Techniques - Stihl TS 700 Manual De Instrucciones

Safety Precautions and
Working Techniques
The use of any cut-off
machine may be hazard-
ous. Because a cut-off
machine is a high-speed,
fast-cutting power tool,
special safety precau-
tions must be observed to
reduce the risk of per-
sonal injury and fire.
It is important that you
read, fully understand
and observe the following
safety precautions and
warnings. Read the
instruction manual and
the safety precautions
periodically.
Warning!
Careless or improper use of any cut-off
machine may cause serious or fatal
injury.
Have your STIHL dealer show you how
to operate your cut-off machine.
Observe all applicable national, state
and local safety regulations, standards
and ordinances.
Warning!
Your cut-off machine is for professional
use only. Do not lend or rent your cut-off
machine without the instruction manual.
Be sure that anyone using it under-
stands the information contained in this
manual.
TS 700, TS 800
A first-time operator should obtain
practical instruction before using the
machine. Employers should establish a
training program for operators of
gasoline-powered, hand-held portable
cut-off machines to assure safe
operation of these machines. These
safety precautions and warnings apply
to the use of all current STIHL Cutquiks.
Warning!
Use your cut-off machine only for
authorized uses. For instance, it is not
suitable for cutting wood or wooden
objects. Misuse may result in personal
injury or property damage, including
damage to the machine.
Warning!
Minors should never be allowed to use a
cut-off machine. Bystanders, especially
children, and animals should not be
allowed in the area where a cut-off
machine is in use. Never let the cut-off
machine run unattended.
Different models may have different
parts and controls. See the appropriate
section of your instruction manual for a
description of the controls and function
of the parts of your model cut-off
machine.
Safe use of a cut-off machine involves
1. the operator
2. the power tool
3. the use of the power tool.
THE OPERATOR
Physical Condition
You must be in good physical condition
and mental health and not under the
influence of any substance (drugs,
alcohol, etc.) which might impair vision,
dexterity or judgment. Do not operate a
cut-off machine when you are fatigued.
Be alert – if you get tired while operating
your cut-off machine, take a break;
tiredness may result in loss of control.
Working with any cut-off machine can be
strenuous. If you have any condition that
might be aggravated by strenuous work,
check with your doctor before operating
a cut-off machine.
Warning!
Prolonged use of cut-off machines (or
other machines) exposing the operator
to vibrations may produce whitefinger
disease (Raynaud's phenomenon) or
carpal tunnel syndrome. These condi-
tions reduce the hand's ability to feel
and regulate temperature, produce
numbness and burning sensations and
cause nerve and circulation damage
and tissue necrosis. All factors which
contribute to whitefinger disease are not
known, but cold weather, smoking and
diseases or physical conditions that
affect blood vessels and blood trans-
port, as well as high vibration levels and
long periods of exposure to vibration are
mentioned as factors in the develop-
ment of whitefinger disease. In order to
reduce the risk of whitefinger disease
and carpal tunnel syndrome, please
note the following:
English
3