Checking the battery charge level
♦
Press the battery charge level button
the status of the battery (see also main diagram) .
The status/remaining charge will be shown on
the battery display LED
♦
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Use
Switching on and off
Switching on:
♦
To start the appliance, press the ON/OFF
switch
and keep it pressed in .
The LED work light
OFF switch
is depressed lightly or fully . This
allows for illumination of the work area in low
lighting .
Switching off:
♦
Release the ON/OFF switch
appliance .
Setting the speed/tightening torque
♦
Press the ON/OFF switch
speed/tightening torque . Increasing the pressure
increases the speed/tightening torque .
■
The tightening torque depends on the selected
speed and impact duration .
CAUTION!
♦
The tightening torque actually attained must
always be checked with a torque wrench!
NOTE
►
The integrated motor brake ensures rapid
stoppage .
Changing the direction of rotation
♦
Change the direction of rotation by pressing the
rotational direction switch
or right .
PDSSA 20-Li A1
to check
as follows:
lights up when the ON/
to switch off the
lightly for a low
towards the left
Inserting the bits
♦
Insert the adapter
tool holder
.
♦
To do this, pull the locking sleeve
and allow the adapter
engage .
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The appliance is maintenance-free .
■
The appliance must always be kept clean, dry
and free from oil or grease .
■
Never allow liquids to get into the appliance .
■
Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleansers which
can damage plastic .
■
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The optimum storage
environment is cool and dry .
NOTE
►
Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline .
or bit holder
into the
forwards
or bit holder
to
19
GB│IE │
■