Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Recall Function
Bridge Function
Automatic pan de-
tection function
Residual heat indi-
cator
FMA 839 HI / FMA 839 HI LL KIT
This function is used to recall all the hob function settings in the event of
involuntary shut-down or a sudden power cut.
When the hob is turned off, if it is not turned on again within 6 seconds using
the
button will flash for 6 seconds. Press the button again to recover the fun-
ctions set previously. A beep sounds to confirm the operation.
With the hob turned off, if it is turned on again within 6 seconds the previous function
settings are recovered automatically.
This function allows 2 cooking areas to be connected, so that they can be controlled
as a single, large cooking area. This means it is possible to use pans with a larger
bottom.
To activate: with the hob turned on, simultaneously press the required buttons to se-
lect the 2 areas to form a bridge, until a Digit displays
has been activated. The other Digit is used to set the power level.
Warning: The left cooking areas cannot be connected to the right ones, and vice versa.
To deactivate: simultaneously press the buttons that have been used to create the
bridge, until the symbol
If a pan is placed on one of the cooking areas, the hob detects it automatically and
lights up the corresponding Digit at maximum intensity, displaying
The residual heat indicator is a safety feature, indicating that the surface of the
cooking area is still at a temperature of 60 °C or above, which may cause burns if
touched by a naked hand.
The Digit for the corresponding cooking area displays
disappears.
– 16 –
to indicate that the function
.
.
,
Publicidad
