Bosch GWS Professional 19-125 CI Manual Original página 23

If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting and brushing metal,
stone, plastic and composite materials, roughing metal,
plastic and composite materials as well as making holes in
stone materials using diamond annular cutters, without the
use of water. Make sure that the correct protective guard is
used (see "Operation", page 28).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Spindle lock button
(3) On/off switch
Technical Data
Angle Grinder GWS
Article number
Rated power input
Power output
A)
Rated no-load speed min
Speed adjustment range min
Max. grinding disc dia-
meter/rubber sanding pad
diameter
Grinding spindle thread
Max. thread length of
grinding spindle
Bosch Power Tools
11-125 19-125 CI
3 601 G9D 0.. 3 601 G9N 0..
W 1100
W 740
–1
11,500 11,500
–1
–
mm 125
M 14
mm 22
(4) Speed preselection thumbwheel
(GWS 19-125 CIE)
(5) Standard auxiliary handle (insulated gripping sur-
a)
face)
(6) Vibration-damping auxiliary handle (insulated grip-
ping surface)
(7) Protective guard for cutting
(8) Protective guard for grinding
(9) Extraction guard for grinding
(10) Mounting flange with O‑ring
a)
(11) Carbide grinding head
a)
(12) Grinding disc
a)
(13) Cutting disc
(14) Quick-clamping nut
(15) Clamping nut
(16) Two-pin spanner for clamping nut
(17) Grinding spindle
(18) Handle (insulated gripping surface)
(19) Extraction guard for cutting with cutting guides
a)
(20) Diamond cutting disc
a)
(21) Hand guard
a)
(22) Cup brush
a)
(23) Rubber sanding pad
a)
(24) Abrasive disc
a)
(25) Round nut
a)
(26) Diamond annular cutter
(27) Cover for cutting
(28) Disc brush (dia. 22.22 mm)
a)
(29) Disc brush (M 14)
a)
(30) Open-ended spanner
a)
(31) Conical brush
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
19-125 CIE 19-125 CIST
3 601 G9P 0.. 3 601 G9S 0..
1900 1900
1220 1220
11,500
– 2800–11,500
125 125
M 14 M 14
22 22
English | 23
a)
a)
a)
a)
a)
19-150 CI
3 601 G9R 0..
1900 1900
1220 1220
7800 9700
– –
125 150
M 14 M 14
22 22
1 609 92A 5RE | (06.06.2023)