Bosch GWS Professional 19-125 CI Manual Original página 24

24 | English
Angle Grinder GWS
Speed preselection
Constant electronic control
Restart protection
Soft start
KickBack Control
Weight according to EPTA-
B)
Procedure 01:2014
Protection class
A) Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed
must not exceed the rated no-load speed and is therefore lower.
B) Depends on protective guard ((7), (8), (27)) and auxiliary handle ((5), (6)) in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Values can vary depending upon the product and are subject to application and environmental conditions. For further informa-
tion www.bosch-professional.com/wac.
Noise/Vibration Information
GWS
Noise emission values determined according to EN IEC 62841-2-3.
Typically, the A-weighted noise level of the power tool is
Sound pressure level dB(A)
Sound power level dB(A)
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN IEC 62841-2-3:
h
Surface grinding and abrasive cutting:
a m/s
h
K m/s
Disc sanding:
a m/s
h
K m/s
Grinding thin metal sheets or other materials that tend to easily vibrate with a large surface area can cause the noise emission
value to increase by up to 15 dB. Suitable, heavy damping mats can reduce the increased noise emissions. Increased noise
emissions must be taken into consideration, both for the risk assessment of the noise output and for selecting suitable hearing
protection.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
1 609 92A 5RE | (06.06.2023)
11-125 19-125 CI
–
–
●
●
–
kg 2.2–2.5 2.3–2.6
/ II
11-125 19-125 CI
3 601 G9D 0.. 3 601 G9N 0..
95
103
dB
3
2
6
2
1.5
2
3.2
2
1.5
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and accessories, keeping their hands warm, and
organising workflows correctly.
19-125 CIE 19-125 CIST
– ●
● ●
● ●
● ●
● ●
2.3–2.6 2.3–2.6
/ II / II
19-125 CIE 19-125 CIST
3 601 G9P 0.. 3 601 G9S 0..
95 95
103 103
3 3
5.9 5.9
1.5 1.5
3.3 3.3
1.5 1.5
19-150 CI
– –
● ●
● ●
● ●
● ●
2.3–2.7
/ II / II
19-150 CI
3 601 G9R 0..
94 95
102 103
3 3
6.3 8.6
1.5 1.5
4.5 4.2
1.5 1.5
Bosch Power Tools