Brita WHS-202 Instrucciones De Instalación página 10

household filtration
Use and Care
Brita Valve-In-Head Drop-in Filtration WHS-202
®
Usage and quality of water in your cold water line affect the life of filter cartridges.
Cartridges should be replaced sooner if water pressure at the faucet begins to drop
noticeably or if the filter fails to perform satisfactorily.
After prolonged periods of non-use, it is recommended that the filter be
flushed thoroughly. Let water run for 10 minutes before using.
The filter used with this filter housing has a limited service life. Changes in
taste, odor, and/or flow of the water being filtered indicate that the filter should be
replaced.
Housing
WHS-202 Valve-In-Head Drop-in Filtration
Replace filters every six months or when flow
rate decreases significantly.
Replacement Parts
Part Number
WFBAB-150
WFBAO-150
WFBAW-150
10
The above flow rates are not performance tested or Certified by NSF.
Filter Model Numbers
WHF-104 -Sediment Carbon Wrap (included)
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
WHF-103 -Poly Block Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating pressure 30-100 psi (207-690kPa)
WHF-102 - String Wound Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
WHF-101 - Poly Pleat Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
Description
Mounting Bracket
O-Ring
Housing Wrench