Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents
• Electric pressure washer
• Handle
• Trigger gun
• Spray wand assembly
• Adjustable spray wand nozzle
• Two (2) Phillips head screws (for handle)
• Cord holder
• Needle clean-out tool (included with manual packet)
• High-pressure hose
• Wheel + rim brush
• Garden hose adapter (female coupler)
• Manual with registration card(s)
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
customer service center at
®
Assembly
Tools required: Phillips head screwdriver
1. Following the alignment grooves at the top of the machine
body, slide the handle into position from the front to the back,
so that the solid side of the handle faces the front of the
washer. Secure the handle using a Phillips head screwdriver
and the two (2) supplied Phillips head screws (Fig. 1).
Fig. 1
Alignment
grooves
2. Slide the cord holder into position (Fig. 2).
Fig. 2
Cord holder
3. Fit the two pieces of the spray wand assembly together
and rotate it until the two parts are completely locked
(Fig. 3).
Fig. 3
7
Handle
R
Publicidad
