Dimplex BLF7451-INT Manual Del Propietário página 13

Fireplace Installation
fireplace chassis, into wall
studs (Figure 8).
6. Refer to Front Glass
Installation section, for final
installation procedures.
Front Glass Installation
1. Evenly distribute supplied
glass rock on the front tray of
the fireplace (Figure 9).
2. Carefully mount front glass
assembly so that the front
glass hooks (4) hang on the
front glass mounts on the
fireplace (4) (Figure 10).
3. Use the supplied two (2)
Phillips sheet metal screws
to fasten the glass assembly
tabs to the fireplace (Figure
11).
4. Ensure the fireplace's
3-Position Switch is switched
to the Off position ("O").
5. If unit is not hard-wired, plug
fireplace into a 10 Amp, 230-
240 Volt outlet (refer to NOTE
1).
Figure 8
Wall
surface
Mounting hole
Mounting hole
13