Toshiba RAV-SM564UT-E Manual Del Propietário página 13

4-way Air Discharge Cassette Type
How to set up the wind direction
1
Push
The wind direction changes for every push of
the button.
In HEAT operation
Direct the louver (adjustment plate of up/down
wind direction) downward. If directing at
horizontally, hot air may not come to the foot.
In COOL/DRY operation
Direct the louver (adjustment plate of up/down
wind direction) horizontally. If directing it
downward, the dew may form on the surface of the
air discharge port and may drop down.
In FAN operation
Select a desired wind direction.
How to start swinging
1
Push
plate of up/down wind direction)
direction to the lowest position, and
then push
SWING
wind direction is automatically selected.
Display during swinging
during operation.
Initial setup
Initial setup
Initial setup
, set the louver (adjustment
again.
is displayed and the up/down
Repeat
How to stop swinging
1
Push
the louver is swinging.
• When
direction can be set again from the
highest position.
* However, even if
the louver is swinging, the louver position is
displayed as follows and highest position of
the louver may not be selected.
Display when swinging is stopped
In this case, push
later.
• In COOL/DRY operation, the louver does
not stop as it directs downward. If stopping
the louver as it directs downward during
swing operation, it stops after moving to the
third position from the highest position.
Display when stopping the swing
Unit select button
• When multiple indoor units are controlled with
one remote controller, wind direction can be set
for each indoor unit by selecting individually.
• To set wind direction individually, push
button to display an indoor unit number in the
control group. Then set the wind direction of the
displayed indoor unit.
• When no indoor unit number is displayed, all
indoor units in the control group can be
controlled simultaneously.
• Each time you push
changes as follows:
Unit No.
1-1
Not
display
– 12 –
Owner's Manual
Unit select button
1
at a desired position while
is pushed after that, wind
is pushed while
FAN/HEAT COOL/DRY
operation operation
again two seconds
FAN/HEAT COOL/DRY
operation operation
button, the display
Unit No. Unit No.
1-2 1-3
Unit No.
1-4
EN
12-EN