KTM 95812968044 Instrucciones De Montaje página 21

–
Fit and tighten special screws
ded) on top.
Guideline
Special screw,
engine moun-
ting bracket
501398-01
–
Position plastic clamps
501399-01
–
Position the left crash bar
–
Position the right crash bar
–
5
Fit screws
–
bn
Fit nuts (included), but do not tighten yet.
501400-01
–
Position clamping pieces
The plastic clamps
–
Fit and tighten screws
Guideline
Screw, crash bar
–
Tighten screws
Guideline
501401-01
Screw, crash bar
–
Tighten nuts
Guideline
Nut, crash bar
Final steps
–
Remove the motorcycle from the lifting gear at the rear (see
Owner's Manual).
4
with washers
M8x25 25 Nm (18.4 lbf ft)
8
(included) on the frame.
1
(included).
2
(included).
(included), but do not tighten yet.
6
(included).
8
sit centrally under the clampings.
7
(included).
M6x18
5
.
M6x14
bn
.
M8
ASSEMBLY 5
3
(all inclu-
Loctite ® 243™
9 Nm (6.6 lbf ft)
9 Nm (6.6 lbf ft)
30 Nm (22.1 lbf ft)
9