Descargar Imprimir esta página

INVENTOR PR-ION-20L Manual De Usuario página 15

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 164
allow approximately three minutes before acting as such.
Do not connect the dehumidifier to a multiple power socket outlet, which is also being in use
with other electrical appliances.
Select a suitable location, making sure you have easy access to an electrical power outlet.
Plug the unit into an electric socket-outlet with proper grounding.
Make sure the water bucket is correctly fitted otherwise the unit will not operate properly.
NOTE: When the water in the bucket reaches a certain level, please be careful when moving the
device to avoid accidental spilling.
Do not force casters to move over carpet surfaces, nor move the unit with full water in the
bucket. (the unit may tip over and the water may spill)
Installation tips
3) Ensure the filter is clean.
4) Place unit in vertical operating position and
allow 2 hours before initial use in order to avoid
malfunctions.
EN
1) Do not block or restrict the
airflow around the unit. Make
sure the air inlet exhaust grills are
Allow 20cm of
not obstructed.
clearance around the unit and
40cm above.
2) Place the unit in an area
where the temperature levels
will not fall bellow 5ºC (41ºF)
There is a possibility the coils
will collect frost at temperatures
that are under 5ºC (41ºF), which
may result in low performance.
(Working conditions: 5°C-32°C,
30%RH–80%RH).
5) Prior to initial use, please remove
the water bucket and check if any
packaging parts (for example: the
draining hose) are included. Remove
and re-position the water bucket firmly
into place.
15

Publicidad

loading