Control Panel; Indicator Lights - Zanussi ZDF4010 Manual De Instrucciones

• A qualified and competent person must do the electri-
cal installation.
• A qualified and competent person must do the plumb-
ing installation.
• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,

Control panel

1
1 On/off button
2 Programme selection buttons
3 Delay start button
4

Indicator lights

5 Digital display
6 Function buttons
Programme-in-progress
Indicator lights
– Comes on when you select a washing programme.
– Stays on for all the duration of the washing programme.
– Goes off at the end of the washing programme.
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
A B C
6
5 4
2 3
D E
19