Publicidad
Idiomas disponibles
Idiomas disponibles
ZGR OPTIME
On the other hand, place the UPS away from the monitor at least 20 cm to avoid interference.
7.
Connection
Plug the UPS into a 2-pole, 3-wire grounded receptacle. Then connect each computer-related device into the
output sockets supplied on the back of the UPS. Do not connect Laser printer to outlets, because they are high
peak current devices and this UPS may not support and could be damaged permanently.
8.
Turn On/Off
To turn on the UPS unit, press the power switch lightly.
To turn off the UPS unit, press the power switch again.
9.
DC Start
All Series are equipped with DC Start. To start the UPS when AC utility power is not available, simply press the
power switch.
10. Important safety warning (SAVE THESE INSTRUCTIONS)
This UPS utilizes voltages that may be hazardous. Do not attempt to disassemble the unit. The unit
contains no user serviceable parts. Only factory service personnel may perform repairs.
Internal battery voltage is 2 pcs / 12 Vdc. Sealed lead-acid, 6 cells battery.
QUICK GUIDE
Publicidad
