Fanimation The Marea FP8026 Serie Manual Del Propietário página 11

1. Remove the two screws in the motor assembly.
Retain the screws for installation Step 4. (Figure 18)
2. Pull out the housing door assembly from the motor
assembly and loosen the wire connectors of receiver.
(Figure 19)
3. After replace the new receiver, then operate the setting
process again, see page 6 " How to Wire Your Ceiling Fan".
(Figue 20)
4. Re-install the housing door assembly onto the motor
assembly with two screws removed in the Step1.
(Figure 21)
How to Replace Receiver
11
Motor Assembly
Figure 18
Housing Door
Assembly
Figure 19
Figure 20
Figure 21