Publicidad
Idiomas disponibles
Idiomas disponibles
CL EA NI NG T IP S
• For quick cleanup, combine 1 cup warm water and a drop of liquid dish
soap in the blending jar.
• Cover and blend on Speed 2 for about 30 seconds.
• Discard liquid and rinse thoroughly.
Important:
• Do not place the jar parts in boiling liquids.
• Do not immerse the base in liquid. Wipe the base with a damp cloth and
dry thoroughly.
• Remove stubborn spots by rubbing with a damp cloth and nonabrasive
cleaner.
Note: If liquids spill onto the base, wipe with a damp cloth and dry thoroughly.
Do not use rough scouring pads or cleansers on parts or finish.
TROU B LESHO OTIN G
Problem
LED blinking
quickly
Blender stops/
goes into
STANDBY mode
Blender is
having difficulty
blending
Possible Cause
Blender overheated or
button held longer
than 30 seconds.
Blending time exceeds
2.5 minutes.
Mixture is too thick or
air bubble has formed
between mixture & blade.
Solution
Unit must be reset. Unplug to
reset. Let unit cool for at least
20 minutes.
Re-select appropriate speed
setting to start blender.
Turn blender off. Use rubber spatula
to scrape down sides of jar and
redistribute, pushing food towards
blades. Add more liquid if needed.
10
Publicidad
