Philips Avance Collection HR2381 Manual Del Usuario página 4

ENGLISH
6
3 Disassemble the front panel, the shaping disc, the shaping disc holder, the mixing paddle,
and the mixing chamber in order.
4 Clean all detachable parts, and wipe them dry.
Assembling
1 Push the mixing chamber into the appliance. (Fig. 7)
2 Point the mixing paddle to the hole in the main unit. Insert the mixing paddle all the way
into the main unit. (Fig. 8)
3 Attach the disc holder onto the appliance.
4 Put the shaping disc onto the disc holder , and make sure it is firmly fixed on the disc
holder. (Fig. 10)
Note: Make sure the inner cavity of the shaping disc and disc holder is properly fitted.
(Fig. 11)
5 Attach the front panel to the main unit.
Note:
y Make sure the front panel is completely fastened before using the appliance.
y The front panel is heavy. Take extra caution when assembling it.
6 Fasten the front panel control knobs.
Note: If the front panel or the shaping disc is not properly assembled, a safety switch will
prevent the appliance from working.
7 Close the mixing chamber lid.
Note: If the mixing chamber lid is not properly installed, the safety switch will prevent the
appliance from working.
Using the Pasta maker
Start preparation
1 Put the plug in the power socket. The pasta maker sound once, and all indicators flash once.
(Fig. 15)
Note: Make sure that all the parts are well assembled before plugging in.
2 Press the On/off button to turn on the appliance.
3 Select the pasta type with the Program selection button.
Program
Plain pasta/noodle
Egg or flavoured pasta/
noodle
Note: For more recipes, refer to the recipe book.
(Fig. 5)
(Fig. 9)
(Fig. 12)
(Fig. 13)
(Fig. 14)
Tip
• Pasta with flour and water only
• Pasta with flour and egg liquid
• All kinds of flavored pasta
(Fig. 6)
(Fig. 16)
(Fig. 17)
Optional recipe
• Wheat noodle
• Durum noodle
• Wheat pasta
• Durum pasta
• Carrot pasta/noodle
• Tomato pasta/noodle
• Soba
• Beet pasta/noodle