Additional Function; Getting Started - Medisana FTN Instrucciones De Manejo

The new infrared sensor technology used in the device also allows
the temperature to be displayed as if it were taken orally, rectally
or from the underarm.

Additional function

Apart from measuring body temperature, the FTN infrared
thermometer from MEDISANA can also be used to measure the
temperature of objects (e.g. fluids, surfaces, ambient tempe-
rature). The temperature range for this function is between 0 and
100 ˚Celsius.
3 Operation

3.1 Getting started

Removing / inserting batteries
The MEDISANA FTN infrared thermometer comes with the
batteries installed. However, if the battery symbol appears in the
LC display after a certain period of use, you must replace them
with two new 1.5 V batteries (LR03, AAA).
Removal:
Take the battery compartment cover off. Take out the batteries.
Insertion:
Put in two new 1.5 V batteries (LR03, AAA). Make sure the
batteries are the right way around (see the diagram in the battery
compartment). Put the battery compartment cover back on.
WARNING
BATTERY SAFETY INFORMATION
• Do not disassemble batteries!
• Clean the battery and device contacts if necessary
before putting in the batteries!
• Remove discharged batteries from the device
immediately!
• Increased risk of leakage, avoid contact with skin,
eyes and mucous membranes! If battery acid comes
in contact with any of these parts, rinse the affected
area with copious amounts of fresh water and seek
medical attention immediately!
2 Useful Information /
3 Operation
Continued —>
GB
19