Descargar Imprimir esta página

STERWINS PLM3-56B190.4 Instrucciones Legales Y De Seguridad página 75

Ocultar thumbs Ver también para PLM3-56B190.4:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
4. PARTS DESCRIPTION
Upper handle
1
Starter handle
2
Locking lever
3
4
Grass catcher
5
Wheel
6
Height adjusting lever
Sideward ap
7
5. TECHNICAL DATA
Model
Engine type
Self-propelled
Engine displacement
Nominal power
Cutting width
Blade type
Blade tightening torque
Rated speed
Oil tank capacity
Fuel tank capacity
Grass catcher capacity
Net weight
Height adjustment
Measured sound pressure level
at operator's position
Measured sound power level
Guaranteed sound Power level
Vibration
EN
Side discharge channel
8
Spark Plug
9
Fuel cap
10
Oil cap
11
12
Cable clamp
13
Self-drive control handle
Brake control handle
14
PLM3-56B190.4
B&S 875Exi
Yes
190cm
3.2kW
56 cm
DAYE 2105200257
44~46N.m
2800/min
600 cm
1000 cm
70L
36.5 kg
25-75mm,
7 adjustment
85.8dB (A)
k=3 dB (A)
95.3dB (A)
k= 2.18dB (A)
98dB(A)
4.02m/s²
k=1.5 m/s²
7
In you encounter some problems with this tool, please follow these solutions.
If you cannot resolve your problem, please contact our service agent.
1. Engine does not start:
•Fill tank with fuel.
•Clean air cleaner element.
•Tighten spark plug.
•Install spark plug wire on spark plug.
•Set gap between electrodes (customer service center).
•Install new, correctly gapped plug.
•Remove air cleaner element and pull starter rope continuously until carburetor
clears itself and install air cleaner element.
2. Engine di cult to start or loses power:
•Drain fuel and clean tank. Fill tank with clean, fresh fuel.
•Clean or replace fuel tank cap.
•Clean air cleaner element.
3. Engine operates erratically:
•Install new, correctly gapped plug.
•Set gap between electrodes (customer service center).
•Clean air cleaner element.
4. Engine idles poorly:
•Clean air cleaner element.
•Remove debris from slots.
•Remove debris from cooling ns and air passages.
5. Engine skips at high speed:
•Set gap between electrodes (customer service center).
6. Engine overheats:
•Remove any debris from slots in shroud, blower housing, air passages.
7. Mower vibrates abnormally:
•Tighten blade.
•Balance blade.
8
6. TROUBLES SHOOTING
EN

Publicidad

loading