Publicidad
U S E R M A N U A L
This User Manual has been translated for your
convenience using machine translation. Reasonable
efforts have been made to provide an accurate
translation; however, no automated translation
is perfect nor is it intended to replace human
translators. The official User Manual is the English
version. Any discrepancies or differences created in
the translation are not binding and have no legal
effect for compliance or enforcement purposes. If
any questions arise related to the accuracy of the
information contained in the User Manual, please
refer to the English version of those contents which is
the official version.
TECHNICAL DATA
Parameter description
Parameter value
Product name
LEVEL LASER
Model
SBS-LL-276
Measurement range [m]
15-30
Self-leveling range [°]
4 ± 1°
Accuracy [mm]
± 1.5/5000
Laser class
II (> 1 mW)
Ambient temperature during
-10~50°C
operation [°C]
Ambient temperature during
-25~70°C
storage [°C]
EN
IP code
IP54
Laser wavelength [nm]
505-550
Dimensions [width x depth x
180x85x90
height; mm]
Weight [kg]
0,5
2000mAh 3.7V
Laser power supply
lithium-ion battery
Charging parameters
DC 5V 1A
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
For indoor use only.
CAUTION! Laser beam. Looking into laser light
prohibited. Class 2 laser.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The term „device" or „product" in the warnings and in the
description of the instructions refers to the LASER LEVEL.
2.1. ELECTRICAL SAFETY
a)
The plug of this device must fit into the outlet. Do
not modify the plug in any way. Original plugs and
matching outlets reduce the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Do not use the cord in an unintended manner. Never
use it to carry the device or to pull the plug out of
the socket. Keep the cord away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled
cords increase the risk of electric shock.
d)
Do not use the unit if the power cord is damaged
or shows signs of wear. A damaged power cord
should be replaced by a qualified electrician or the
manufacturer's service department.
e)
To avoid electric shock, do not immerse the cable,
plug, or the appliance itself in water or other liquid.
Do not use the appliance on wet surfaces.
and
f)
Do not allow the machine to get wet. Risk of electric
shock!
2.2. SAFETY IN THE WORKPLACE
a)
Keep the work area tidy and well lit. Disorder or poor
lighting can lead to accidents. Be foresighted, watch
what you are doing and use common sense when
using the device.
b)
If you find any damage or irregularities in the
operation of the device, immediately turn it off and
report it to an authorized person.
c)
If you have any doubts as to whether the product
is working properly or if it is damaged, contact the
manufacturer's service department.
d)
Only the manufacturer's service department can
repair the device. Do not carry out repairs yourself!
e)
No children or unauthorized persons are allowed
in the work area. (Inattention may result in loss of
control of the device.)
6
f)
Keep these instructions for use for future reference.
If the device is to be passed on to a third party, the
operating instructions must also be handed over
together with the device.
g)
Keep the packaging and small assembly parts out of
the reach of children.
h)
Keep the device away from children and animals.
i)
When using this device together with other devices,
also follow the other instructions for use.
PLEASE NOTE! Keep children and other bystanders
safe while operating the device.
PERSONAL SAFETY
a)
Do not operate this product if you are tired, ill or
under the influence of alcohol, drugs or medication
that could impair your ability to operate the product.
b)
The device may be operated by persons who
are physically fit, capable of operating it and
appropriately trained, and who have read this
instruction manual and have been trained in
occupational safety and health.
c)
Use caution and common sense when operating this
device. A moment's inattention during operation
may result in serious personal injury.
d)
Use personal protective equipment as required when
operating the device as specified in Section 1 of the
explanation of symbols. The use of appropriate,
approved personal protective equipment reduces
the risk of injury.
e)
Do not overestimate your capabilities. Maintain
body balance and equilibrium at all times during
operation. This allows for better control of the
machine in unexpected situations.
f)
The device is not a toy. Children should be watched
to ensure that they do not play with the device.
SAFE USE OF THE DEVICE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not turn on and off). Devices
that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
b)
Keep unused equipment out of the reach of children
and out of the reach of anyone unfamiliar with the
device or this instruction manual. These devices is
dangerous in the hands of inexperienced users.
c)
Keep the device in good working condition. Check
before each use for general damage or damage to
moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the
device). If damaged, have the device repaired before use.
d)
Keep the device out of the reach of children.
e)
Repairs and maintenance should be carried out by
qualified personnel using only original spare parts.
This will ensure the safety of use.
f)
To ensure the designed operational integrity of the
device, do not remove factory-installed covers or
loosen screws.
g)
Do not tamper with the device to alter its
performance or design.
h)
Pointing the laser beam at people, animals or
reflective surfaces is prohibited. The laser beam can
seriously damage your eyesight.
i)
Use caution when using this device and do not
expose your eyes to the laser beam as this may
damage your eyesight.
j)
Glasses do not protect against the harmful effects
of the laser beam on the eyes. They only serve
to improve the vision of the laser light in bright
surroundings or at a distance.
k)
Do not look at the laser beam directly or through
optical instruments.
l)
Avoid positioning the laser at human eye level. Do
not modify the unit in any way. Doing so may cause
a risk of exposure to laser radiation.
m)
Exposure to a Class 2 laser beam is considered safe
for a maximum of 0.25 seconds. Eyelid reflexes
usually provide sufficient protection.
n)
Do not short-circuit the battery terminals, recharge
alkaline batteries, or dispose of batteries in a fire.
o)
Keep batteries out of the reach of children.
p)
Do not mix different types of batteries, or old and
used batteries.
q)
Install batteries according to the polarity direction
indicated on the device and battery symbols.
r)
Remove used batteries from the device and dispose
of them safely in accordance with the law.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The device is used to project straight lines horizontally and
vertically onto the work surface.
The user is liable for any damage resulting from
unintended use of the device.
3.1. PRODUCT OVERVIEW
1
2
3
4
5
6
1.
Pulsation button - a short press of this button will
change the brightness of the light (laser intensity).
2.
ON/OFF switch - when the lock switch is moved to
the "
" (Locked), press and hold this button to turn
the device on or off.
3.
Lock switch
4.
Battery indicator
5.
Type C charging port
6.
Mounting hole with 1/4" thread
7
EN
Publicidad
