Listening To Audio From A Bluetooth Device - Teac SL-D800BT Manual Del Usuario

Listening to audio from a Bluetooth device

With this unit, you can enjoy listening to music played back
on another Bluetooth device wirelessly.
1
Press the Bluetooth function button.
The Bluetooth icon ( ) blinks, and the unit searches
for paired devices.
o When using the remote control, press the
FUNCTION button repeatedly until the Bluetooth
indicator lights.
o The Bluetooth indicator lights when Bluetooth is
selected.
When connection with another Bluetooth device
succeeds, the Bluetooth icon ( ) will appear on the
display without blinking.
o The unit will automatically try to connect to the
previously connected device.
o Pairing is necessary before using the Bluetooth
function of this unit for the first time and when you
want to connect a new Bluetooth device.
o If connection fails, confirm that the other Bluetooth
device is ready to make a Bluetooth connection.
o If the connection is lost during use, and the
Bluetooth icon ( ) blinks on the display, conduct
the connection operations again on this unit and
the other Bluetooth device.
2
Operate the Bluetooth device to start
playback.
If the connected Bluetooth device supports AVRCP,
you can use this unit or the remote control to play,
pause or stop audio on that device.
Depending on the Bluetooth device being used,
remote control operation might not be supported or
actual operations might differ.
o The volume, however, cannot be adjusted remotely.
Audio/Video Remote Control Profile (AVRCP)
To control playback of a Bluetooth device, the Bluetooth
device must support AVRCP.
Some Bluetooth devices, however, have different functions
depending on their specifications.
o If you cannot control another Bluetooth device with this
unit, operate the other Bluetooth device directly.
Unpairing a device
To disconnect, press and hold the Bluetooth function but-
ton for at least two seconds or the remote control PAIRING
button.
o If you later want to use a Bluetooth connection with
that Bluetooth device, you must pair them again.
o This deletes all pairing information. Unpairing with just
one device is not possible.
25