Publicidad
Idiomas disponibles
Idiomas disponibles
G-ST 6000+ G3
Preparations
Network
applications
Instructions on installation of in-house PC cards and external devices
Before you begin establishing connections and specifying configurations, you should
familiarize yourself with the hardware and use of your system:
Number and manufacturer of the recording cameras.
Number and type of input contacts for event recording.
For serial connection of cash-dispensing machines or access control systems
with card readers, the protocol used and the serial parameters.
The required storage capacity for image data (take into account an additional
15% of the calculated image storage capacity for management of images).
Recording grid (number of images per unit time) of the corresponding cameras
for permanent and/or event recording.
You should also be experienced in dealing with MS Windows and be able to in-
stall hardware and software.
For setup of network applications, you should also have the following information
available to you:
Network topology and technology and responsibilities of your system.
Computer name and/or IP addresses of the computers and devices to be set.
To avoid expensive installation and to ensure correct operation, consider the follow-
ing:
Wherever possible, use PC cards offered by GEUTEBRÜCK. If you ordered
these cards with the device, they are already installed and ready for operation.
When re-ordering a card, we strongly recommend also ordering assembly and
the installation at the same time.
Installation of third-party PC cards is performed at your own risk as we cannot
ensure proper system function in such a case.
Use only monitors that meet the minimum requirements set out here. If possible,
use only standard PC keyboards and mice that are MS Windows-compatible.
If possible, use printers that are supported by MS Windows and whose printer
drivers can be found on the system disk in the Windows directory.
For connecting external devices, note in general:
G-ST 6000+ G3 devices do not have a CD-ROM/DVD drive. When selecting
devices, please ensure that the devices are compatible with MS Windows.
For the use of a recovery DVD you need an external USB drive.
In this context, please also take into account the training that GEUTEBRÜCK
of-fers for safe use of the hardware and software of the G-ST.
14
Back to the
table of contents
Publicidad
