Publicidad
1. Adjusting screw
1. Vis de réglage
1. Tornillo de ajuste
4. Put a new bulb into position and secure it in
place with the bulb holder.
5. Install the bulb holder cover.
6. Install the headlight cover by installing the
screws.
7. Adjust the headlight beam if necessary.
Headlight beam adjustment
CAUTION:
It is advisable to have a Yamaha dealer make
this adjustment.
To raise the beam, turn the adjusting screw in
direction a.
To lower the beam, turn the adjusting screw in
direction b.
8-81
EBU01089
Publicidad
