Publicidad
Teléfono de escritorio
Mobile
Softphone
People I talk to can hear a buzz in
the background.
El dispositivo para descolgar el
teléfono está instalado pero no
descuelga el teléfono.
Cuando utilizo un cable EHS con
un teléfono Poly VVX y respondo
a una llamada con el auricular, la
llamada falla.
Pairing problems
Why doesn't the base
automatically reconnect with my
mobile phone?
When I use an EHS cable with a
Poly VVX phone and I answer a
call with my headset, the call fails.
When I dial from my softphone
application, nothing happens.
• If the audio level is too low in this position, increase the
headset volume. See
Adjust
volume.
• If your speaking volume is too low for your listener in this
position, adjust the position of the headset to make sure the
microphone is as close as possible to your mouth.
• Move the base further away from your phone. See
Your
Base.
• If the base power supply is plugged into a power strip, plug it
into the wall directly.
Asegúrese de que el cable de alimentación de dicho
dispositivo está correctamente insertado en el conector del
dispositivo para descolgar el teléfono de la base.
Se trata de un problema conocido. Pulsa uno de los botones
de audio de la base (ordenador/móvil/teléfono de escritorio)
para responder a la llamada entrante.
Ensure the Bluetooth LED on the base flashes red and blue by
pressing the Bluetooth button for four seconds.
Ensure the Bluetooth mobile phone is in search mode.
When an active Bluetooth connection has been made, the
base Bluetooth LED is solid blue.
Ensure Aplicación de escritorio Poly Lens has been installed.
Adjust the "Auto-connect to mobile phone" in Aplicación de
escritorio Poly Lens.
This is a known issue. Press one of the base audio buttons
(computer/mobile/desk phone) to answer the incoming call.
Ensure your headset is charged.
Ensure your headset is subscribed to the base. See
Subscribing a Headset.
Ensure that the Poly software is installed. To download, visit
poly.com/software.
Ensure that you are using a compatible softphone
application. For a list of compatible softphones, visit
poly.com/software.
If the Poly software is not installed and you do not have a
compatible softphone, you must first press the base
computer call button and then use the softphone interface to
place/answer/end calls.
Ensure that the headset is the default sound device by going
to your Sound Control Panel (Windows) or your Sound
System Preferences (Mac).
Position
18
Publicidad
