ISC Rocker Instrucciones De Uso página 12

Textiles: Check for cuts, tears & abrasions, damage due to deterioration, contact with heat, alkalis or other
corrosives, label legibility.
Stitching: Check for broken, cut, loose or worn threads.
Metals: Check for cracks, distortion, corrosion, wear by abrasion, burrs, worn or loose rivets or screws,
discolouration caused by extreme heat (greater than 100° C) broken springs, seizure of moving parts,
broken or missing components, marking legibility.
Immediately withdraw from service any items showing defects. Any repairs must be carried out by the
manufacturer or their authorised agent.
Warning
Work at Height and Rescue are hazardous activities. It is the user's responsibility to ensure understanding of the
correct and safe use of this equipment, to use it only for the purposes for which it is designed and to practise all
proper safety procedures.
The time that a casualty is suspended should be kept to a minimum. Attention should be paid to the dangers
suspension trauma.
The user shall ensure that the safe function of this product is not impaired by, and does not impair, the safe
function of another component or system.
Rope diameter, construction, age, wetness, slipperiness, tension, etc will affect how the device performs. In a safe
place, users should familiarise themselves with the function and performance before each use. The effects of ice,
dirt, snow, oil, etc on the rope must also be considered.
Strengths quoted are when the product is tested new and are in accordance with the manufacturer's test methods
to the appropriate standard. Any weights and measurements are within the standard's specified tolerances.
When the anchor line becomes loaded by the full weight of the user this becomes the working line and a safety
line should be used in addition for the optimum safety of the user. Overloading or dynamic loading may damage
the anchor line.
Markings
Each individual component is marked, where applicable, with:
• The name, trademark or any other means of identification provided by the manufacturer or supplier.
• The batch or serial number
• The date of manufacture (DoM)
• Product description and/or reference
• The British &/or EN standard(s) to which the item conforms
• Min/ Max rope diameter (commercially stated rope diameters have a tolerance up to ± 0,2 mm)
• Lad rating
• UKCA &/or CE mark & notified body number
12