Fob Battery Replacement - Baldwin EVOLVED Manual Del Propietário

The fob is powered by
one CR2025 battery.
To save battery power,
your fob will enter sleep
mode when it is still.
To extend battery life,
consider leaving your fob
at rest when not in use.
4. Slide the battery out from
between the two contacts.
Dispose of the old battery
according to local laws
and regulations.

FOB BATTERY REPLACEMENT

1. Place the fob on a flat
surface, with the fob's
button on the bottom.
button
5. Insert a new CR2025 battery,
sliding it between the two
contacts so that the positive
face of the battery touches
the positive contact.
positive contact
2. Use a small coin to twist and
pry apart the two halves of the
fob. You may need to use force.
6. Place the circuit board and battery
assembly back into the gasket.
11
3. Remove the circuit board
and battery assembly,
and keep the gasket in the
bottom half of the fob.
gasket
7. Press the two halves of the
fob back together, making
sure they snap into place.