Fob Pairing - Baldwin EVOLVED Manual Del Propietário

1. To activate the fob for the first
time after unboxing, press and
release the fob's button (do
not press and hold). The fob's
internal LED will flash green.
LED
button
5. Hold the fob close against the back panel. The
fob's LED will begin to blink faster. When it turns
solid green, the fob is successfully enrolled. If
the LED flashes
red, pairing is
unsuccessful. A B

FOB PAIRING

2. Remove the interior cover
or window to gain access
to the back panel. See
page 10 for details.
A B
back
panel
6. Bring your fob and standard key outside and
close the door. Make sure there is a clear line of
sight between the fob and the lock. Test the fob
to make sure it locks and unlocks the door.
3. Press and release the fob's
button again to intiate pairing.
The LED will begin to blink green.
button
9
4. Press and hold the Program
button on the back panel
for two (2) seconds.
A B
If you are unable to pair the fob, reboot
the lock and try steps 2-6 again.
To reboot, remove the battery pack,
wait a few seconds, then reinsert the
battery pack. See page 10 for battery
removal instructions. When the lock
reboots, the light string will flash amber.