Filling With Water; Dry Ironing; Steam Ironing - Oster GCSTBS5802 Manual De Instrucciones

• Turn off the Iron and disconnect the plug from the electrical wall outlet before filling
the Iron with water.
• Turn the Steam Select Switch to the closed position
• Set the Iron in the position indicated below (figure 2) and fill it with water, no higher
than the Max fill level shown on the See Through Water Window.
• Insert the plug in the electrical wall socket.
• Make sure that the Steam Select Switch is in the closed position
• Select the desired temperature on the Temperature Control Dial.
• After the Indicator Light goes off, you may start to iron.
• Steam ironing is only possible at high temperatures ("
on the Temperature Control Dial.
• Be sure that there is enough water in the Reservoir.
• Set the iron in an upright position.
• Plug the steam Iron into the wall electrical outlet.
• Turn the Temperature Control Dial to the desired position within the range of
temperatures included in the steam area of the dial.

Filling With Water

(figure 2)

Dry Ironing

Steam Ironing

English - 5
.
.
", " "), as indicated