Descargar Imprimir esta página

Canon SPEEDLITE 580EX II Manual De Instrucciones página 46

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting the Flash Output for Each Slave
With manual flash and multiple Speedlites, you can set a different flash
output for each slave unit.
All settings are done with the master unit.
Press the <D> button so
1
that <q> is displayed.
Press the <G> button
2
so that <y> blinks.
Select the flash ratio.
3
Turn the <9 > dial to select <l>
or <j>, then press the <8>
button.
Set the flash output.
4
Press the <8> button.
The slave ID <m> will blink.
Turn the <9> dial to set the flash
output for <m>, then press the <8>
button.
The slave ID <n> will blink. Turn the
<9> dial to set the flash output for
<n>, then press the <8> button.
The slave ID <o> will blink. Turn the
<9> dial to set the flash output for
<o>, then press the <8> button.
All the slave IDs will light.
45

Publicidad

loading