Control And Handling; Disposing Of The Packaging - CAN FL Serie Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

GAS HOB UNITS COMBINED WITH RECESSED SINK ▪

RECEPTION OF THE APPLIANCE

The appliance is delivered to the customer in a cardboard box (A), protected by shaped polystyrene shells

(B) to avoid damage during transport and storage.

In addition to the appliance, the box also contains:

▪

the installation, use and maintenance manual (C),

▪

a fixing kit (D) including screws and accessories for installation of the appliance on the support structure.

CONTROL AND HANDLING

Upon reception of the appliance, proceed to unpack it.

After having removed all the packaging material and protective film, check for any faults.

Should any faults be discovered, do not install the appliance and contact your dealer within 8 days from

the date of purchase, reporting the data on the identification label of the appliance and the problems

encountered.

ATTENTION!

Do not leave unattended or release the packaging or parts of it into the environment because

they are potentially hazardous (risk of suffocation for children and animals).

Lift the appliance by hand to move it to the installation site.

ATTENTION!

During handling, make sure not to damage the appliance, persons, animals or objects in the

immediate vicinity.

ATTENTION!

The edges and some parts of the equipment could be sharp: pay attention and always wear

suitable personal protective equipment (PPE).

The materials used for packaging are recyclable and must be collected according to local standards on

separate waste collection.

ATTENTION!

Separate the different materials making up the packaging and dispose of them in compliance

with standards in force in the Country of installation.

FL series

MANUALE DI ISTRUZIONI