Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3
Recommended Maintenance Schedule
To ensure safe riding, day to day care and regular maintenance are essential. You, the owner, have control and knowledge of
how often you use your scooter, how hard you use it and where you use it. It is the owner's responsibility to perform regular
checks and bring your scooter to authorized service center for inspection and service. Please refer to the maintenance
schedule below.
Note: This maintenance schedule charges a service fee.
Item
Component
Maintenance method
Use a soft, wet cloth to wipe the
Mainframe parts
mainframe clean.
Tire pressure
Inflate tires to 50-55 psi
Check if the tires are cracked,
Tire wear
deformed, or significantly worn.
Tighten the screws fixed with the
handlebar and the stem. The suggested
torque is 5.5±0.5 N·m.
Screws on the
Tighten the screw on the throttle. The
stem top
suggested torque is 3.5±0.1 N·m.
Mainframe
Tighten the screws on the brake lever.
maintenance
The suggested torque is 5.5±0.1 N·m.
Tighten the screws on the stem top. The
suggested torque is 10±0.5 N·m.
Tighten the screw fixed with the front
Screws on the
fork and screw in the core position of
folding
the folding structure (visible after
mechanism
folding). The suggested torque is 10±1
N·m. Tighten the screws on both sides.
The suggested torque is 12.5±1 N·m.
Tighten screws to fix disc brake base.
Disc brake
The suggested torque is 7.7±0.2 N·m.
base
To accelerate and decelerate, check if
Hub motor
the hub motor is stalled or has
Function
abnormal sounds.
Inspection
Check if the front wheel is stalled or gets
Front wheel
shaky, or the axis shaft is unbalanced.
maintenance
07
Every 3
Every 6
Every 12
Every 36
months
months or
months or
months or
every 500
every 1,000 km
every 15,000
km (310
(621 miles)
km (9,320
miles)
miles)
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Item
Component
Maintenance method
If the brake is too tight/loose, use the 4
mm Allen key to loosen the screw on
Brake
the caliper. Then slightly adjust the
adjustment
brake line (decrease/increase the
exposed length), and tighten the
screw again.
Spin the wheels, the caliper should be
Brake pads
aligned with the rotor and they
shouldn't rub on the brake pads.
Squeeze the brake lever, the tail light
Taillight
works normally.
Check the headlight and see if it lights
Headlight
brightly.
Toggle the direction indicator button to
Direction
Function
the left/right respectively, check if the
indicators
Inspection
direction indicators on the left/right
side flash normally.
Power on the scooter, the dashboard
Dashboard
works properly.
Power on/off the scooter, the buzzer
Buzzer
sound is normal.
Press the horn button and the sound is
Horn（Only for
F2 Pro）
loud.
Bell
Ring the bell and the sound is loud.
Press and hold the throttle then release
it, checking for acceleration and
deceleration.
Throttle
Note: Release it, check if the throttle
will back to the position.
After connecting with the
Segway-Ninebot app: 1) Update the
firmware to the latest version. 2) Check
Fault
if the notification of the corresponding
detection
error code and possible causes will
prompt when the scooter detects an
error
Charge the scooter: 1) Check if the
current battery power displays on the
dashboard. 2) Check the LED indicator
Charging
on the battery charger.
Charging: red, Fully charged: green.
EN
Every 3
Every 6
Every 12
Every 36
months
months or
months or
months or
every 500
every 1,000 km
every 15,000
km (310
(621 miles)
km (9,320
miles)
miles)
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
08
Publicidad
