Agri-Fab 45-0603 Manual De Instrucciones página 7

aTTaCH THe BooM SupporT BraCKeT To
THe TraCTor HITCH
STep 7:
(See FIGure 7)
• Attach the boom support bracket (2) to the tractor hitch
using one hex bolt (A), two washers (K), and one hex
nut (G).
A
K
note: May require hitch kit 45-0596
ConneCT TanK HoSe To THe BooM
aSSeMBLy
STep 8:
(See FIGure 8)
• Attach the tank hose to the 3/8" tee barb on the boom
assembly .
K
G
FIGure 7
FIGure 8
aTTaCH WIre HarneSS To THe BaTTery
STep 9:
(See FIGure 8)
• Attach ring terminals to the correct battery terminals
(Note: Red to Red and Black to Black).
• Connect the wire harness switch (12) to the wire
harness battery (13).
• Route the wire harness switch towards the sprayer
using the plastic wire harness clips (P). note: Be sure
to secure the harness clear of exhaust, fans, and pinch
points.
• Attach the wire harness switch (12) to pump harness.
13
7
12
FIGure 9