MPM MKE-14 Manual De Instrucciones página 25

 If, for some reason, it is impossible to turn off the heating
plate (e.g. the control module is broken), disconnect the plug
or turn off the fuses and inform the service about the failure.
 The power cord cannot have contact with the heating zones.
 The cooker is not designed for storing any objects.
 Before using put the cooker on a hard, flat and dry surface.
 The heating plate is equipped in a safety system which
disconnects the power of the heating zone when moving
or removing the pot from the heating zone.
 Do not put any flammable objects under the heating plate,
as they may cause fire.
 Note any carried metal objects (e.g. keys, decorations). They
may be heated up and cause burns. This does not apply only
to objects with magnetic characteristics (e.g. silver, gold).
 Do not heat up closed cans or other containers as the in-
crease of thermal energy inside the containers may lead to
sudden burst.
 Keep the sensor buttons clean. Do not put any objects on
them.
 If the content of the pot is boiled over on the sensor buttons,
disconnect the plate and clean it. The heating surface is hot.
 Take particular caution if there are children near the device.
 After long operation, the heating surface of the plate may
still be hot. Do not touch the surface as there is a danger
of burn.
 Regular checking whether there are any objects near the air
outlets, which may impede the airflow, is recommended.
 The power cord should be regularly checked whether there
are any damages. Do not use the device if the power cord is
EN
25