MPM MKE-14 Manual De Instrucciones página 28

EN
APPLIANCE OVERVIEW
1. Heating plate maximal power 1800W
2. Control panel
a. Touch button switch (ON/OFF)
b. Keep warm touch button
c. Temperature/power adjustment touch
button
d. Parameter adjustment touch buttons (-/+)
GENERAL INFORMATION
1. The induction hob generates a strong magnetic field that induces eddy currents in the bottom of
the pan which produce heat. This means that only the pan is heated and not the hob, which saves
a lot of electrical energy and significantly reduces the cooking time.
2. Make sure to use a pan compatible with induction hobs. Do not use pans which have uneven
bottoms, support feet or a diameter smaller than 12 cm. The maximum diameter is 20 cm. Do not
use glass, clay or aluminium pots.
3. Always keep the hob and the control panel clean. Use dry fingers and firm movements when op-
erating the keyboard.
4. The hob features an undervoltage and overvoltage protection system. If the voltage changes too
much, the appliance will report an error (see the error table).
BEFORE FIRST USE
1. Remove the appliance from the box. Remove all plastic sheets, bags and styrofoam inserts.
2. During unpacking check appliance if there are not damaged.
3. Clean the appliance (see CLEANING & MAINTENANCE).
4. Make sure that your mains power supply corresponds to the voltage stated on the rating plate.
USAGE INSTRUCTIONS
1. Place the appliance on a firm, level and dry surface.
2. Plug the power cord to the mains. A short sound signal will be played, and the display (2h) will show
the "L" status. Keyboard operation will always produce a sound signal.
3. Place a compatible pan on the heating zone (1). Any attempt to start the heating process without
a pan on the heating plate or with an incompatible pan will result in the "EO" error code on the
display (2h).
4. Turn on the appliance using the on switch (2a) and press the "Menu" button (2c) to go to heating
parameter selection. If you take no action after turning on the hob, it will automatically turn off
after 30 seconds.
HEATING POWER – use the function selection touch button (2c) to select heating pow-
er – "P" LED will light up, indicating that heating has begun. Use parameter adjustment
touch buttons (2d) to select adequate heating power. The following power settings are
available: 200, 350, 500, 650, 800, 1000, 1200, 1400, 1600, 1800 W. The higher the
power, the faster the cooker heats up, which ultimately means that meals can be prepared
more quickly. The power can be re-adjusted at any time.
HEATING TEMPERATURE – if you want to heat the meals according to temperature, use
the function selection touch button (2c) to select temperature – a LED will light up (°C),
indicating that heating has begun. Use parameter adjustment touch buttons (2d) to select
adequate temperature. The available temperature settings are: 60, 80, 100, 120, 140, 160,
28
e. Milk heating touch button
f. BOOST touch button
g. Timer touch button
h. LED display
3. Ventilation openings
4. Anti-slip feet