Descargar Imprimir esta página

Bimar VM45 Folleto De Instrucciones página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

-
Average speed set, lamp
medium/minimum speed and turned off; then after 30 minutes the cycles are: speed minimum and
off, and the signal lamp on
-
Minimum speed set,
is turned off
3. Natural: intermittent ventilation (symbol "
Maximum speed selected
Minimum speed selected
To turn the fan off, press the "OFF" key on the remote control or control panel
remove the plug from the socket.
When not in use for long periods, the plug must always be removed from the socket.
CLEANING AND MAINTENANCE
Attention: before normal cleaning, remove the plug from the socket.
• Ensure that the fan is switched off from the supply mains before removing the guard (12).
• Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or other liquid: if this should happen, do not
put your hand in the liquid, but first remove the plug from the socket. Carefully dry the
appliance and make sure that all the electrical parts are dry: in the case of doubt, ask for
professionally qualified help.
• It is essential that the motor's air holes be kept from dust and lint.
• If the fan will not be used for long periods, it must be protected from dust and humidity; we
recommend storing it in its original packaging.
• Should you decide not to use the appliance any more, we recommend making it inoperative
by cutting the power cord (after making sure you have disconnected the plug from the
socket) and make dangerous parts harmless if children are allowed to play with them (such
as the blade).
(
):
cycles 30 minutes, the fan will run at intermittent
(
),and then will switch to low speed until the unit is turned off
(
),: the fan will always run at intermittent minimum speed until the unit
Medium speed selected
"), as shown in the diagrams shown here.
18/48
, then
"
"

Publicidad

loading

Este manual también es adecuado para:

M004-l16d3f