Fluid Compatibility; Safety Testing Approvals - Sotera SV Serie Manual De Instalación, Operación Y Seguridad Del Propietario

SV Pump & Motor Performance
•
Pressure ~ 20 PSI (2.07 bar) bypass valve setting (up to 40 cps viscosity)
•
20 GPM (75 LPM) for the following models:
o SV20A1DBSB
o
SV20A1DNSD
o SV20A2DBSD
o FRSA120800MN
o FRSA120800N
o FRSA120801MA
•
TDH = 46 feet at bypass valve rating
•
Operating temperature 14º – 104ºF* (4º C - 49º C)
Overall Dimensions:
AC DEF Pump: 6" wide X 6" high x 12" deep.
DC DEF Pump: 14.15" wide X 16.6" high x 14" deep.
Shipping Weight:
AC DEF Pump: 25 lbs.
DC DEF Pump: 25 lbs.

Fluid Compatibility

Diesel Exhaust Fluid (Aqua Urea 32.5% solution)
Stoddard Solvents
IMPORTANT! If in doubt about compatibility of a specific fluid, contact supplier of
fluid to check for any adverse reactions to the following wetted materials:
Stainless Steel
WARNING! This pump is not for use with fluids that have a flash point below 100°F
(37.8°C, i.e.: gasoline, alcohol). Refer to NFPA 325M (Fire Hazard Properties of
Flammable Liquids, Gases, and Volatile Solids) for flash points of common liquids.
Static electricity buildup and discharge could result in arc and explosion.

Safety Testing Approvals

The motors used in the Sotera line of pumps have been safety tested for compliance to
the standards set forth by UL Laboratories.
This product complies with European Directive: 2006/42/EC Machinery and 2011/65/EU
Hazardous Substances.
The following harmonized standards were applied: EN ISO 12100:2010 Safety of
Machinery, EN 809:1998 +A1:2009 Pumps for Liquids
o
FRSD120800MN
o
FRSD120800N
o
FRSD120801MA
Diesel Fuel
Fluorocarbon
12
Mineral Spirits
Acetal
DC000568-000 Rev 1