Descargar Imprimir esta página

Craftmade Bellows IV BW414 Guia De Instalacion página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Installation Preparation.
Determine the approximate position where you
want the fan to be located on the wall. Note: To
prevent personal injury and damage, this fan
must be mounted at least 7 feet (2.13m) from the
floor.
This fan can only be mounted on an INDOOR wall
or on an ENCLOSED porch or ENCLOSED patio
wall.
NOTE: Ensure there is an electrical source near
the approximate location, such as an outlet box
or an electrical outlet.
CAUTION: If you are going to attach the fan to a
wood stud or wood post, the stud or wood post
must be wide enough and thick enough to
sustain the wall bracket and the weight of the
fan.
Installation requires these tools:
Phillips screwdriver, flathead screwdriver,
adjustable pliers or wrench and stepladder
4. Wall Bracket Insatallation.
Turn off circuit breakers to current fixture from
breaker panel and be sure operating light switch
is turned to the OFF position.
WARNING: Failure to disconnect power supply
prior to installation may result in serious injury.
You MUST use ALL FOUR holes in wall bracket
when installing wall bracket. Position the wall
bracket at desired installation spot and mark
4 hole locations.
Drill 4 pilot holes over hole locations marked
onto mounting surface.
["Wall Bracket Installation" continued on next
page.]
7 feet
(2.13m)
ENCLOSED porch or
ENCLOSED patio
wall installation
page 4
7 feet
(2.13m)
INDOOR
wall installation
Pilot holes
7 feet
(2.13m)

Publicidad

loading